By Wolfgang Keller
Originally published 2025-02-09
Last modified 2025-06-08
Additions to BOM (Kappy - Google Sheets [visited 2025-05-29T21:19:36Z]); both other screws and additions for DragonBurner toolhead
Which parts do you have to print for the DragonBurner toolhead (voron/V0/Dragon_Burner at main · chirpy2605/voron · GitHub [visited 2025-05-29T23:27:51Z])? On this page there is a configurator linked: DragonBurner Configurator [visited 2025-05-29T23:32:45Z]. Using the parameters
we obtain:
Concerning the Brace: as of 2025-06-08, I'm not yet sure what the best choice is (none, Loop (Brace_Loop.stl), or Straight (Brace_Straight.stl)), but my gut feeling is that Straight (Brace_Straight.stl) might be the best choice.
Additionally/instead, we need/use a cowl part for the BLtouch probe. It can be found at Dragon Burner BLTouch/3DTouch von mtczekajlo | Kostenloses STL-Modell herunterladen | Printables.com [originally published 2024-03-27; last modified 2024-04-07; visited 2025-05-29T23:42:52Z]. Choose whether you want to put the BLTouch probe to the left or right side.
Now it becomes clear why we wanted a cowl with a Voron logo: the cowl part for the BLtouch probe is based on it.